Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Structural fixings & support
(138)
Structural fixings and support for secure connections in concrete, steel and masonry. Anchors, resin and expansion fixings, through bolts and studs. Brackets, channels and framing. Masonry support angles, windposts and restraints. Wall ties and tie rods. Hangers, baseplates and beam clamps. Cladding and curtain wall fixings for facades. Load transfer and bracing applications.
Structural fixings & support - helping you find the best solution for your project.
FIRMA masonry support systems
FIRMA masonry support systems are designed to allow for typical building tolerances and on-site adjustments. Supplied complete with the appropriate fixing packs and accompanying drawings for simple on-site installation. Design and fabrication of secondary steel products. Galvanised mild steel for the support of masonry brick and blockwork
TVS SH Acoustic Hangers - steel ceiling isolators with Sylomer core
TVS SH Acoustic Hangers are made from steel with Sylomer® material for isolating suspended ceilings and equipment. Designed to reduce both low and high-frequency noise transmission. Suitable for use with threaded rod suspension systems. Each hanger supports up to 75kg and is shipped fully assembled for quick installation: acoustic hanger for
Wirand® - steel fibre reinforcement for concrete flooring
Wirand steel fibres are used to reinforce industrial concrete flooring. Steel Fibre Reinforced Concrete (SFRC) has been enhancing concrete performance for over a century. By incorporating steel fibres into the concrete mix, both mechanical and physical properties are significantly improved, creating stronger, more durable, and more reliable
Delta PT Ultra Fix - plug for fixing plastic membranes to walls
Delta PT Ultra Fix plugs are made from high-impact polymers for fixing Delta PT membranes, AT 800 and 3mm membranes to walls. Designed for watertight, self-sealing installation, they can accept a 5mm screw for pipe clips or cable tracks and act as an alternative to Delta Plugs and Qwik Seal Plugs- PRODUCT
Delta Membrane Systems
TVS resilient wall ties
Where it is required to structurally tie an isolated wall into an unisolated structure, there is a potentia bridge in the box-in-box design. TVS resilient wall ties overcome this problem by integrating a high-performance Sylomer element into the wall tie. Available in a whole host of designs, depending upon the construction of the isolated and
Timbercut Landscape Screws - galvanised steel screws for timber fixing
Timbercut Landscape Screws Box of 50 are made from galvanised EN 10083 2 steel with a 1000-hour green organic coating for exterior use, designed for fixing timber in landscaping, decking, fencing, and similar applications. Each box contains 50 screws sized 7.0 x 200mm, with a hex washer head and magnetic driver included: box of 50 galvanised steel
TVS VT Acoustic Hanger
TVS VT Acoustic Hangers offer cost effective solutions for isolation of suspended equipment and ceilings. Designed to solve both low and high frequency attenuation problems in a protective space or radiating to surrounding locations. Ideal for suspended ceilings, piping, ductwork, air handling units and HVAC equipment: static deflections up to
Stainless steel and mild steel windposts for facades and brick walls
Stainless steel and mild steel windposts for structural facades and brick walls are used to span vertically between floors of a building to provide additional structural strength to a wall where wind loads need to be addressed. L-profile, C-profile, box-profile, parapet and balustrade options available
Habegger HIT-Manual Winch - manual steel cable winch for lifting & pulling
Habegger manual wire rope winches are available in four versions. Habegger HIT-06 is the smallest and lightest unit available for pulling, lifting and lowering. Features: light alloy housing; anchorage bolts secured; overload protection by shear pin; exchangeable shear pins in jaw opening lever; case available. Technical data: rated force (pulling, lifting, lowering): 600kg
Habegger HIT-TRAC 8B - portable electric steel cable lifting winch
A range of powered winches is available includes a super light power-driven rope pulling machine for lifting, pulling and lowering with unlimited rope strength. Technical data: rated force (pulling, lifting, lowering) - 800kg; overload protection by sliding clutch - at approx 20% overload; rope speed - approx 10m/min; rope length - unlimited; weight including
Stainless Steel Wire Rope Assemblies - strong 316 cables for structures
Jakob Stainless Steel Wire Rope Assemblies are made from high grade 316 stainless steel and designed for architectural, structural, and safety applications. Size range spans 1mm to 26mm, with multiple construction types and a broad selection of fittings for varied installation needs: stainless steel wire rope assemblies for architectural and
ArmaFix AF - pipe and duct support
ArmaFix AF is a pipe and duct support system made of PET-foam core embedded in elastomeric insulation to prevent thermal bridging and condensation at fixing points. Designed for refrigeration and air-conditioning installations, it integrates with AF/ArmaFlex or AF/ArmaFlex Evo for seamless insulation. Load-bearing PET foam bonded withAF/ArmaFlex
ArmaFix NH Smart - halogen free pipe support
ArmaFix NH Smart is a halogen free pipe support to prevent condensation and thermal bridging at fixing points in refrigeration and air-conditioning systems. It features PET-foam bearing segments, attached to NH/ArmaFlex Smart elastomeric foam. The outside shell is made from 0.8mm aluminium sheeting which serves as a vapour barrier: load-bearing
ArmaFix Ecolight
ArmaFix Ecolight is a lightweight, insulated pipe support designed to thermally isolate pipework from brackets, eliminating thermal bridging and preventing condensation at support points. Made with 100% recycled PET foam core and elastomeric ArmaFlex insulation with a PVC outer foil for compatibility with adjoining insulation. Suited to HVAC and
ArmaFix Ultima - pipe and duct support for cooling systems
ArmaFix Ultima is a one-piece pipe support system designed to prevent condensation in refrigeration and air conditioning installations. It has two ArmaFORM PET foam sections and a self-adhesive closure to fit with ArmaFlex Ultima: pipe support system designed to reduce condensation at fixing points; for cooling systems, including refrigeration and
Windpost package for 5-storey office building - Putney
FIRMA collaborated with the designer, developer and main contractor to deliver a sizeable windpost package for Parklife, a 5-storey office building overlooking the Grade II listed Wandsworth Park in Putney, London. This 40,000 sq ft vacant office building has been converted into a high-quality 80,000 sq ft urban workplace. FIRMA's sister company
Bluebird cavity wall screw ties comply with the strength requirements of DD140-1 for a type 2 tie. They are used to connect new walls to existing buildings at right angles. Quick and easy to use, no special tools or skills required to install them. The ties are made from austenitic stainless steel, and are suitable for 50 or 75mm cavities on- PRODUCT
- Bluebird Fixings
Frame cramps are used to tie timber frames to masonry. All are made from galvanised mild steel BS EN 10327:2004. Three sizes are available: 4", 150mm overall 6", 200mm overall 8", 250mm overall- PRODUCT
- Bluebird Fixings
Uni-Wedge universal fixings are suitable for the seven most popular deck profiles, which are nearly always present on steel constructed multistorey buildings. They allow contractors to safely secure struts for cable trays, suspended ceilings and pipework supports to decking profiles without penetrating the decking membrane. Uni-Wedge fixings
Bluebird produces screw ties designed to be used in conjunction with membrane systems- PRODUCT
- Bluebird Fixings
There are many issues associated with failing wall ties: Horizontal and stepped cracking of the masonry / mortar Possible bulging of the walls The original building specification may have used too few wall ties Detection of the problem requires specialist equipment Timberwise have fully trained and experienced surveyors who have a range of systems- PRODUCT
- Timberwise
Bluebird Screwties® provide an easy way of connecting new walls to existing buildings at right angles. They tie in walls without toothing and provide lateral stability for brick, block or stone. The ties can be used for internal or external walls. Galvanised Bluebird Screwties® are available for inner leaves. They are galvanised to BS EN- PRODUCT
- Bluebird Fixings
Timber frame tie are used to fix masonry to timber frame buildings. They are made from 0.5mm thick stainless steel. 250 ties per box complete with stainless steel ring shank nail Complies with strength requirements for a DD 140 type 6 tie To suit a 50mm cavity Tie nails are 50x3.35mm Ties should be installed at a density of 4.4 ties per square- PRODUCT
- Bluebird Fixings
Expansion joint ties are debonding ties supplied complete with PVC sleeve. 2mm thick by 25mm wide, the ties are available 200 or 300mm long, with other lengths to special order. The ties are manufactured from 304 grade stainless steel (BS EN10088-2- PRODUCT
- Bluebird Fixings
